Under the patronage of:

Journal Metrics


Impact factor (2022): 2.1

5.4
2023CiteScore
 
75th percentile
Powered by  Scopus


More about CiteScore


Source Normalized Impact per Paper (SNIP): 0.474


SCImago Journal Rank (SJR): 0.377

 
 

Hydrogen Production from Ammonia Using a Plasma Membrane Reactor

Original scientific paper

Journal of Sustainable Development of Energy, Water and Environment Systems
Volume 4, Issue 2, June 2016, pp 193-202
DOI: https://doi.org/10.13044/j.sdewes.2016.04.0016
Shinji Kambara1 , Yukio Hayakawa1, Yu Inoue1, Tomonori Miura2
1 Energy and Renewable Energy Systems Division, Graduate School of Engineering, Gifu University, 1-1 Yanagido, Gifu, Japan
2 Sawafuji Electric Co., Ltd., 3, Nitta-hayakawa, Ota, Gunma, Japan

Abstract

In this study, an efficient method for using pulsed plasma to produce hydrogen from ammonia was developed. An original pulsed plasma reactor with a hydrogen separation membrane was developed for efficient hydrogen production, and its hydrogen production performance was investigated. Hydrogen production in the plasma was affected by the applied voltage and flow rate of ammonia gas. The maximum hydrogen production flow rate of a typical plasma reactor was 8.7 L/h, whereas that of the plasma membrane reactor was 21.0 L/h. We found that ammonia recombination reactions in the plasma controlled hydrogen production in the plasma reactor. In the plasma membrane reactor, a significant increase in hydrogen production was obtained because ammonia recombination reactions were inhibited by the permeation of hydrogen radicals generated in the plasma through a palladium alloy membrane. The energy efficiency was 4.42 mol-H2/kWh depending on the discharge power.

Keywords: Ammonia, Hydrogen, Plasma reactor, Membrane reactor, Dielectric barrier discharge.

Creative Commons License
Views (in 2024): 699 | Downloads (in 2024): 199
Total views: 6166 | Total downloads: 3302

DBG